Crab Framed Electric Single Girder Overhead Cranes For General
Crab Framed Electric Hoist type Single Girder Overhead Bridge
Cranes system with crab provide solution for materials handling even when production units
or warehouses are comparatively small and low. To minimize the
capital costs for modifications to buildings to provide extra
space, we make use of the minimum of space for our crane systems.
Using various fixing arrangements the single girder travelling
cranes can be fitted individually to the existing space available.
Favorable dimensions result in the optimal highest hook position.
Single beam overhead industrial crane is especially economical to meet lifting tasks within 20t
duty. Time and manpower are greatly saved with a set of single beam
EOT crane in workshop or other application suitable.
Normally there is no maximum safety distance to the ceiling of the
building for single girder cranes with a load capacity range up to
10 T. This makes it a master at saving space even in buildings with
unfavorable dimensions with fewer restrictions. The crane girder is constructed from robust profiles.
Using a comprehensive range of fixing arrangements the travelling
cranes can be designed to fit the available space. All we need for
the planning stage of the crane system are the clear dimensions of
the building. We will then design the Crab Framed Electric Single Girder Overhead Cranes individually for you.
Single girder overhead crane with hoist are widely used in the
1. LIGHT DUTY Cranes for maintenance, warehouse and assembly
2. MEDIUM DUTY Cranes for general engineering application and
3. HEAVY DUTY Cranes for Heavy machine shops, paper mills,
Fabrication shop, etc.
4. EXTRA HEAVY DUTY Cranes for continuous operation in Steel mills
and other Heavy Engineering purpose. Cranes for Outdoor duty is
also designed specially.
|Motor Power||Lifting Motor||kW||3.2/0.45||3.2/0.45||3.2/0.45||3.2/0.45||3.2/0.45|
|Basic Data||Max.Wheel Load||KN||14.7||16||18||20.4||24.3|
|Model of End Carriage||HSE125-15||HSE125-20||HSE125-25||HSE125-30||HSE125-35|
|Crane Wheel Qty.||Pcs||4||4||4||4||4|
Design features include:
Compact dimensions, low weight, easy to operate and easy to
maintain, modular design with direct
fits between components
Bridge Girder, End carriages, Crab Frame manufactured from box
plate design / Rolled Sections.
If required 100% radiography of all butt welding joints of bridge
and end carriages can be provided.
Nante Crane uses sturdy cylindrical/ conical rotor pole-changing
motors with elegant continuous cast
aluminum sections, integrated safety brakes insulation class F,
Variable Frequency Drives & Remote Controls:
We also offer Variable Frequency Drive in hoisting, cross travel,long travel for steples speed control
as an optional feature. We also provide radio remote control cranes
for application in inaccessible and
Failsafe magnetic or hydraulic brakes of 150% torque or more are
fitted on shaft extensions. For heavy duty cranes a second brake
can be mounted to ensure failsafe operation.
Pendant control from floor, master control switches,master
controllers in the driver's cabin can be
provided.Radio remote control can be provided on request.
Modular design, covering a very wide operating range. The systems
are designed for ease of installation and maintenance and reliable
operation, with fuseless circuitry, ducted wiring and non screwed
Every component & part is thoroughly scrubbed & painted
with two coats of primer before assembly & two coats of
synthetic enamel after testing.
To prevent over hoisting & over lowering of hook.